BOAT PRODUCTS
These fuel sensors are a perfect match for your boat or yacht. The basic fuel suction and return tubes are easily cone cted to your fuel system through connectors that are available in different diameters. These sensor can be custom made to fit the needs of your boat or yacht.
They can be fitted with a filter and without level measurement.
Type: fuel Material: aluminum Ohm value: 0 Ohm ~ 180 Ohm, custom values Mounting: Bayonet catch Accessoires: rubber o-ring
Type: fuel Material: aluminum Ohm value: 0 Ohm ~ 180 Ohm, custom values Mounting: 5 hole screw in Accessories: rubber gasket
These sensors are designed to measure changes in the liquid level. They are easy to mount and connect to a gauge. They can also be fitted into different kinds of tanks suited for all kinds of boats and yachts. Without fuel suction and return they are the perfect tool to measure the liquid level in various kinds of tanks.
These sensors can be custom made to fit your needs.
Type: fuel/water tank Material: stainless steel # 316 Ohm values: 0 Ohm ~ 180 Ohm & 30 Ohm ~ 240 Ohm Mount: 1-1/4”BSP thread Accessories: rubber o-ring
Type: fuel/water tank Material: stainless steel # 316 Ohm values: 0 Ohm ~ 180 Ohm & 30 Ohm ~ 240 Ohm Mount: SAE 5 hole screw in Accessories: rubber gasket and 5 stainless steel bolts
Our sewage sensors are the perfect level gauge for your wastewater or septic tank. These high quality sensors indicate when your tank is nearly full. Like all of our sensors, these too are easy and quick to mount.
These sensors can be custom made to fit your needs.
Material: Stainless steel #316 Ohm value: 0 Ohm ~ 180 Ohm Mounting: 1-1/4” BSP thread Accessories: rubber o-ring
Material: Stainless steel #316 Ohm value: 0 Ohm ~ 180 Ohm Mounting: SAE 6-hole screw in Accessories: rubber gasket and 6 stainless steel bolts
Material: Silicone Complete with gauges and 6 meters of cable
Material: nylon en stainless steel
Material: nylon
Combined tank gauge for fuel and waste water. Allows you to switch between two tanks with only one gauge. Ohm value: 0 Ohm ~180 Ohm or 30 Ohm ~ 240 Ohm
Voltage: 12V
Voltage: 12V
Temperature range: 0-100 ºC Voltage: 12V
Temperature range: 0-100 ºC Voltage: 12V
Measurement range: 8V ~ 16V Voltage: 12V of 24V
Ohm value: 68 Ohm ~ 916 Ohm Voltage: 12V or 24V
With this special interface you can connect to up to 7 different level sensors. Suited for all kinds of tanks and sensors. Due to its simple design it is easy to use and it is installed within minutes. Ohm Values: 0 Ohm ~ 180 Ohm or 30 Ohm ~ 240 Ohm
Ohm value: 0 Ohm ~ 180 Ohm Voltage: 12V or 24V
Ohm value: 0 Ohm ~ 180 Ohm Voltage: 12V or 24V
Ohm value: 0 Ohm ~ 180 Ohm Voltage: 12V or 24V
Voltage: 12V of 24V
Current rage: -50A ~ +50A, -80A ~ +80A Voltage: 12V of 24V
Diameter 12mm Lenght: 330mm Voltage: 12V of 24V Material: Stainless steel #304 with 50cm of cable Ohm Value: 68 Ohm ~ 916 Ohm
This indicator is for sailboats 60mA/12-24VDC. With this indicator you can see on the dashboard which navigation lights or on, which gives you the opportunity to anticipate if necessary.
This indicator increases the safety on board. Put the sensor in the bilge-level without water. If unexpected water reaches the warning line, the buzzer will sound the alarm.